Select Page

OTC Gateways

DH1 WIRELESS GATEWAY

Serial Connectivity and Onboard I/O

DH1

 

HIGHLIGHTS

  • Wirelessly gather/distribute sensor data
  • Map I/O anywhere within the network
  • Modbus Master/Slave functionality
  • 1 configurable Serial/RTU port (RS232/RS485)
  • 1 dedicated RS485 port (RJ-45)
  • 4 analog inputs (0-5 Vdc)
  • 2 discrete inputs
  • 2 discrete outputs
  • -40 ˚C to 80 ˚C (-40 ˚F to 176 ˚F)
  • 900 MHz / 915 MHz / 2.4 GHz / 868 MHz
  • Secure AES encryption
  • Class I, Division 2 (Zone 2) certified
  • Advanced peer-to-peer (P2P) communication functionality

Primary Data Collection Point

The OleumTech® DH1 Wireless Gateway plays an integral role in the OTC Wireless Sensor and I/O Network. It possesses the ability to aggregate data from OTC wireless transmitters and I/O modules onto its 320-point register holding table. Third-party devices can access the data over the Modbus or LevelMaster ASCII protocol.

Serial Interface

With the provided RS232/RS485 configurable Serial port, the DH1 can virtually interface with any third-party Modbus device either as a master or slave device. The DH1 can also be configured as a LevelMaster ASCII slave or ROC Link master. Its dedicated RS485 port (RJ-45) can be utilized for connecting to another Serial device.

Advanced Peer-to-Peer Networking

Deploy multiple gateways to the OTC platform, creating a custom, highly scalable network. The gateways have the ability to communicate with one another. Leverage the peer-to-peer technology and funnel data to the primary gateway, optimizing network efficiency and/or designing an extremely flexible I/O mapping system across the entire wireless network.

Onboard I/O

The DH1 is equipped with onboard I/O, comprised of 4 analog inputs (0-5 Vdc), 2 digital inputs, and 2 digital outputs. If additional I/O points are needed, integrate the OleumTech RS485 Modular I/O Expansion System with the DH1 or any other gateway for added versatility.

TECHNICAL SPECIFICATIONS

WIRELESS COMMUNICATIONS 
Radio Band∙ ISM Band (License-Free)
900 MHz / 915 MHz∙ FHSS, FSK, AES Encryption 256-bit (900 MHz), 128-bit (915 MHz)
2.4 GHz∙ DSSS, AES Encryption 128-bit
868 MHz∙ LBT-AFA, AES Encryption 128-bit
Bit Rate∙ 900/915 MHz: 9600 bps / 115.2 kbps; 2.4 GHz: 250 kbps; 868 MHz: 80 kpbs
Output Power (Max)∙ 900/915 MHz: 1000 mW; 2.4 GHz: 63 mW; 868 MHz: 25mW
Receiving Sensitivity∙ 900/915 MHz: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps
∙ 2.4 GHz: -100 dBm @ 250 kbps / 868 MHz: -101 dBm @ 80 kbps
RF Range∙ 900/915 MHz: Up to 40 Miles / 64 km with Clear Line of Sight (Gateway to Gateway or I/O Module)
∙ 900/915 MHz: Up to 7500 Feet / 1.4 Miles / 2.3 km with Clear Line of Sight (Transmitter to Gateway)
∙ 2.4 GHz: Up to 4.3 Miles / 7 km with Clear Line of Sight
∙ 868 MHz: Up to 5.2 Miles / 8.4 km with Clear Line of Sight
HARDWARE FEATURES 
Device Functionality∙ Wireless Gateway with Onboard I/O and I/O Expansion Capabilities
Embedded Controller∙ 32-bit Low Power ARM7 Microcontroller with Internal FLASH (Field Upgradeable)
Serial Interfaces∙ RTU Port (RS232/RS485) Terminal Block
∙ Modbus Master/Slave, LevelMaster ASCII Slave, ROC-Link Master (Supports Opcodes 17 and 10)
∙ RS485 Expansion Port - Modbus Master or Slave (RJ-45)
I/O Interfaces∙ 4 Analog Inputs (0-5 Vdc) with 12-bit ADC
∙ 2 Discrete Inputs (0-24 Vdc) for Dry Contact Relay or Open-Drain Output Devices
∙ 2 Open-Drain Outputs (Imax = 240 mA (Continuous Sink Current @ 80 °C), Vmax = 24 Vdc)
Devices for Controlling External Devices (Valves, Relays, Etc.)
Configuration∙ Config / Debug Port - RS232 Slave Only (RJ-45) / BreeZ® Software for PC
Device Diagnostics∙ Health Tag: Supply Voltage
MECHANICAL SPECIFICATIONS
Dimensions∙ 4.9" (W) x 3" (H) x 1.4" (D) / 124.5 mm (W) x 76.2 mm (H) x 35.6 mm (D)
Package Dimensions ∙ 8" (W) x 6" (H) x 2.5" (D) / 203 mm (W) x 152 mm (H) x 63 mm (D)
Package Weight∙ ~1 lbs / 0.4 kg
Mounting∙ DIN Rail Mountable with Height Adjustability
ELECTRICAL SPECIFICATIONS
DC Power Input∙ 9-30 Vdc
Average Power Input∙ 2 Watt
Power Consumption @ 12 Vdc∙ Idle: 63 mA; Transmission: 348 mA @ 1 Watt
Power Consumption @ 24 Vdc∙ Idle: 40 mA; Transmission: 174 mA @ 1 Watt
CERTIFICATIONS & COMPLIANCE 
EMC/EMI∙ FCC Part 15 (USA), IC ICES-003 (Canada), ACMA (Australia)
Safety∙ Class I, Division 2, Groups A, B, C, D T4; Ex nA IIC T4 Gc
∙ Class I Zone 2 AEx nA IIC T4 Gc
∙ ATEX: Sira 14ATEX4143X; Ex nA IIC T4 Gc
∙ IECEx: SIR 15.0055X; Ex nA IIC T4 Gc
GENERAL SPECIFICATIONS 
Operating Conditions∙ Temperature: Class I, Div 2 / Zone 2: -40 °C to 80 °C (-40 °F to 176 °F)
∙ Humidity: 0 to 99 %, Non-Condensing
Warranty∙ 2-Year Parts and Labor
Country of Origin∙ USA
ORDERING INFORMATION 
Model Numbers∙ WG-0900-DH1, WG-0915-DH1, WG-2400-DH1, WG-0868-DH1
Wirelessly Connects To∙ OTC Wireless Devices (Gateways, Transmitters, I/O Modules)
Configuration Cable∙ SX1000-CC2, 20-ft All-in-One Configuration Cable