WIRELESS HIGH LEVEL SWITCH – TOP MOUNT
Battery-Powered Self-Contained Level Alarm Monitoring Solution
WT-HL1
HIGHLIGHTS
- Single or dual actuation (high / high-high)
- Switch of desired length sold separately
- Up to a 10-year battery life
- Advanced local LCD display interface
- Supports Over-the-Air (OTA) functionality for updating the device configuration (900 MHz only)
- Self-contained, rugged design
- Installs in minutes
- Transmitter: IP66, -40 °C to 70 °C (-40 ˚F to 158 ˚F)
- Level Switch: -40 °C to 120 °C (-40 ˚F to 248 ˚F)
497.8 PSI - 900/915 MHz range: Up to 1.4 Miles / 2.3 km with Clear Line of Sight
- 2.4 GHz range: Up to 1.9 Miles / 3.1 km with Clear Line of Sight
- 868 MHz range: Up to 1.5 Miles / 2.4 km with Clear Line of Sight
- Secure AES encryption
- Class I, Division 1 (Zone 0)
- Intrinsically Safe
High and High-High Level Detection
The OleumTech® OTC Wireless High Level Switch Transmitter provides two actuation points for detecting high and high-high liquid level conditions. The transmitter can also report transition counts. This top tank mounting transmitter is designed for use with an OleumTech high level switch. The switch is sold separately so that you can select the desired length and choose single or dual actuation option. As a safety measure, regardless of state change, this device reports to the wireless gateway at a user-defined interval. This ultra-lower-power transmitter is powered by a replaceable battery pack that provides up to a 10-year life. The push button LCD interface allows for device configuration and instant access to process data.
Reliable, Scalable and Safe
The field-proven wireless transmitter communicates with an assigned wireless gateway within the OTC Wireless Sensor and I/O Network creating a highly scalable network, accommodating virtually any I/O requirement.
The OleumTech wireless transmitter is certified for use in Class I, Division 1 (Zone 0) hazardous locations. It is intrinsically safe, designed not to cause a spark, and can be serviced without being removed from a process.
TECHNICAL SPECIFICATIONS
| WIRELESS COMMUNICATIONS | |
|---|---|
| Radio Band | ∙ ISM Band (License-Free) |
| 900 MHz / 915 MHz | ∙ FHSS, FSK, AES Encryption 256-bit (900 MHz), 128-bit (915 MHz) |
| 2.4 GHz | ∙ DSSS, AES Encryption 128-bit |
| 868 MHz | ∙ LBT-AFA, AES Encryption 128-bit |
| Bit Rate | ∙ 900/915 MHz: 9600 bps / 115.2 kbps; 2.4 GHz: 250 kbps; 868 MHz: 80 kpbs |
| Output Power (Max) | ∙ 900/915 MHz: 10 mW; 2.4 GHz: 63 mW; 868 MHz: 25mW |
| Receiving Sensitivity | ∙ 900/915 MHz: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps |
| ∙ 2.4 GHz: -101 dBm @ 250 kbps; 868 MHz: -106 dBm @ 80 kbps | |
| RF Range | ∙ 900/915 MHz: Up to 7500 Feet / 1.4 Miles / 2.3 km with Clear Line of Sight |
| ∙ 2.4 GHz: Up to 1.9 Miles / 3.1 km with Clear Line of Sight | |
| ∙ 868 MHz: Up to 1.5 Miles / 2.4 km with Clear Line of Sight | |
| HARDWARE FEATURES | |
|---|---|
| Device Functionality | ∙ High Level Sensing Wireless Transmitter (Top / Vertical Mount) |
| Embedded Controller | ∙ Ultra-Low Power RISC Microcontroller with Internal FLASH (Field Upgradeable) |
| Configuration | ∙ Standard RS232 Serial / BreeZ® Software for PC |
| Inputs | ∙ 2 Actuation Points (1 or 2 Float Option) |
| Power Source | ∙ Self-Contained, Internal 3.6 Vdc Lithium Battery |
| Internal Battery Life | ∙ Up to 10 Years, Based on User Defined Reporting Intervals |
| Local LCD Display | ∙ 32-Character Display (16x2 Lines) with 4 Function Keys + Read Button |
| Instant Displayable Read | ∙ Discrete Input 1 & 2 / Battery Voltage / RF Status |
| Local Configuration | ∙ Integral LCD with Push Button Interface |
| Device Diagnostics | ∙ Health Tags: Battery Voltage, Received Signal Strength Indication (RSSI), RF Refresh, RF Timeout |
| CERTIFICATIONS & COMPLIANCE | |
|---|---|
| EMC/EMI | ∙ FCC Part 15 (USA), IC ICES-003 (Canada), ACMA (Australia) |
| ∙ AS/NZS CISPR 32 (Australia), EN55032 & EN55024 (EU) | |
| Safety | ∙ Class I, Division 1, Groups A, B, C, D T3C; Ex ia IIC T3 |
| ∙ Class I, Zone 0; AEx ia IIC T3 | |
| ∙ ATEX: Sira 13ATEX2142X; Ex ia IIC T3 Ga; II 1 G | |
| ∙ IECEx: SIR 13.0054X; Ex ia IIC T3 Ga |
| GENERAL SPECIFICATIONS | |
|---|---|
| Operating Conditions | ∙ Ambient Temperature (Class I, Division 1 / Zone 0): -40 °C to 70 °C (-40 °F to 158 °F) |
| ∙ LCD Screen -20 °C to 70 °C (-4 °F to 158 °F) | |
| ∙ Ambient Temperature (Non-Hazardous Applications): -40 °C to 80 °C (-40 °F to 176 °F) | |
| ∙ LCD Screen -20 °C to 70 °C (-4 °F to 158 °F) | |
| ∙ Humidity: 0 to 99 %, Non-Condensing |
| ORDERING INFORMATION | |
|---|---|
| Model Numbers | ∙ WT-0900-HL1, WT-0915-HL1, WT-2400-HL1, WT-0868-HL1 |
| Switch Ordering Numbers | ∙ Single Actuation: HLTxxx-S Dual Actuation: HLMxxx-yy-S |
| Wirelessly Connects To | ∙ OTC Wireless Gateway |
| Configuration Cable | ∙ SX1000-CC2, 20-ft All-in-One Configuration Cable |
| Replacement Battery | ∙ Use OleumTech SX1000-BP3 Only |
Follow Us