WIRELESS VIBRATION TRANSMITTER
Remotely Monitor Run/Stop Status of Critical Process Equipment
SM-JP4 V
HIGHLIGHTS
- Remotely detect in-motion (run/stop) status
- Configurable for X, Y, or Z-axis orientation
- Accelerometer with weatherproof cable included
- No wiring or running conduit required
- Provides calibration function and signal gain
- Up to a 10-year battery life
- Self-contained, rugged design
- Installs in minutes
- IP66, -40 °C to 70 °C (-40 °F to 158 °F)
- 900 MHz range: Up to 1.4 Miles / 2.3 km with Clear Line of Sight
- 2.4 GHz range: Up to 1.9 Miles / 3.1 km with Clear Line of Sight
- Secure AES encryption
- Class I, Division 1 (Zone 0), Intrinsically Safe
All-Inclusive Hardware Solution
The OleumTech® OTC Wireless Vibration Transmitter provides the ability to remotely monitor the run/stop status (on/off) of a critical process equipment using low frequency vibration detection. The Vibration Transmitter is a fully integrated solution that provides an accelerometer and a replaceable battery pack. The hassle of wiring and running conduit for the sensor is completely eliminated with the provided weatherproof 20 ft cable and M12 keyed connection. The sensor can be configured for X, Y, or Z-axis orientation to perfectly suit your application. The accelerometer can be calibrated for automatically setting the operating threshold. You can also control the signal gain of up to 5X using the Waveform Gain parameter.
Safe, Scalable, and Easy to Use
No third-party mounting hardware is required since the provided accelerometer is equipped with magnetic direct mounting hardware that makes installation extremely quick and easy. The wireless accelerometer provides up to a 10-year life before needing a battery replacement. It communicates with an assigned wireless gateway within the OTC Wireless Sensor and I/O Network creating a highly scalable network, accommodating virtually any I/O requirement. The OleumTech Wireless Transmitter is certified for use in Class I, Division 1 (Zone 0) hazardous locations. It is intrinsically safe, designed not to cause a spark and can be serviced without being removed from a process
TECHNICAL SPECIFICATIONS
| WIRELESS COMMUNICATIONS | |
|---|---|
| ∙ ISM Band, Spread Spectrum | |
| Type: 900 MHz | ∙ 900 MHz: FHSS, FSK, AES Encryption: 256-bit (900 MHz) |
| 2.4 GHz | ∙ 2.4 GHz: DSSS, AES Encryption: 128-bit |
| Bit Rate | ∙ 900 MHz: 9600 bps / 115.2 kbps; 2.4 GHz: 250 kbps |
| Output Power (Max) | ∙ 900 MHz: 10 mW; 2.4 GHz: 63 mW |
| Receiving Sensitivity | ∙ 900 MHz: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps |
| ∙ 2.4 GHz: -100 dBm @ 250 kbps | |
| RF Range | ∙ 900 MHz: Up to 7500 Feet / 1.4 Miles / 2.3 km with Clear Line of Sight |
| ∙ 2.4 GHz: Up to 1.9 Miles / 3.1 km with Clear Line of Sight |
| HARDWARE FEATURES | |
|---|---|
| Device Functionality | ∙ Low Frequency Wireless Vibration Sensor/Transmitter |
| Embedded Controller | ∙ Ultra-Low Power RISC Microcontroller with Internal FLASH (Field Upgradeable) |
| Configuration | ∙ Standard RS232 Serial / BreeZ® Software for PC |
| Vibration Sensor / Accelerometer | ∙ Single-Axis (Read X, Y, or Z Axis), ±2g Range, Primarily Used for Run/Stop (On/Off) Detection |
| Frequency Range | ∙ 30 to 40 Hz |
| Measurement Range | ∙ 1800 CPM to 2400 CPM (Frequency*60) |
| Sensor Cable | ∙ 20 ft / 6.1 m, Weatherproof |
| Sensor to Transmitter Connection | ∙ M12 Keyed |
| Minimum Tx/Read Interval | ∙ 30 Seconds |
| Sensor Sample Rate | ∙ Adjustable: 1000 ms to 2000 ms (Default: 1000 ms @ 3-Minute Interval) |
| Calibration | ∙ Yes, For Setting Operating Threshold (0 = No Motion; 1 = In Operation) |
| Sensor Output Gain | ∙ Up to 5x for Signal Amplification (Waveform Gain Parameter) |
| Power Source | ∙ Self-Contained, Internal 3.6 Vdc Lithium Battery |
| Internal Battery Life | ∙ Over 10 Years, Based on User Defined Reporting Intervals |
| Device Diagnostics | ∙ Health Tags: Battery Voltage, Received Signal Strength Indication (RSSI), RF Refresh, RF Timeout |
| MECHANICAL SPECIFICATIONS | |
| Dimensions | ∙ 5.25" (W) x 6" (H) x 4.25" (D) / 133.4 mm (W) x 152.4 mm (H) x 108 mm (D) |
| Package Dimensions | ∙ 10.25" (W) x 14" (H) x 6.5" (D) / 260 mm (W) x 356 mm (H) x 165 mm (D) |
| Weight | ∙ Net: 3 lbs ; Gross: 4.5 lbs |
| Enclosure Casing Material | ∙ Type 4X Aluminum; IP66 |
| CERTIFICATIONS & COMPLIANCE | |
|---|---|
| EMC/EMI | ∙ FCC Part 15 (USA), IC ICES-003 (Canada) |
| Safety | ∙ Class I, Division 1, Groups A, B, C, D T3C; Ex ia IIC T3 |
| ∙ Class I, Zone 0; AEx ia IIC T3 |
| GENERAL SPECIFICATIONS | |
|---|---|
| Operating Conditions | ∙ Ambient Temperature (Class I, Division 1 / Zone 0): -40 °C to 70 °C (-40 °F to 158 °F) |
| ∙ Ambient Temperature (Non-Hazardous Applications): -40 °C to 80 °C (-40 °F to 176 °F) | |
| ∙ Humidity: 0 to 99 %, Non-Condensing | |
| Warranty | ∙ 2-Year Parts and Labor |
| Country of Origin | ∙ USA |
| ORDERING INFORMATION | |
|---|---|
| Model Numbers | ∙ SM5000-JP4 V (900 MHz), SM5400-JP4 V (2.4 GHz) |
| Wirelessly Connects To | ∙ OTC Wireless Gateway |
| Configuration Cable | ∙ SX1000-CC2, 20-ft All-in-One Configuration Cable |
| Replacement Battery | ∙ Use OleumTech SX1000-BP3 Only |
Follow Us