WIRELESS HYDROGEN SULFIDE (H2S) TRANSMITTERS
Battery-Powered, Self-Contained H2S Gas Detection Solution
WT-H2S | WT-H2S-A
HIGHLIGHTS
- H2S measurement range: 0.0 to 100.0 ppm
- Resolution: 0.1 ppm
- Field replaceable sensor module
- 2 configurable alarm setpoints: high and high-high
- 2 alarm status DOs (Solid State Relay), WT-H2S-A option only
- Burst mode in alarm state (faster transmit interval)
- Field calibratable, 2 points (zero and custom: 10-50 ppm)
- Bump tests and alarm acknowledgments can be
performed using just the external scroll button - Configurable transmit interval for when H2S is present
- Dust/splash guard included
- Provides helpful sensor maintenance tags such as
total days since last bump test and calibration - Advanced local LCD display interface
- Self-contained, rugged design, battery-powered
- IP66, -40 to 50 °C (-40 to 122 °F)
- 900 MHz / 915 MHz / 2.4 GHz / 868 MHz
- Secure AES encryption
- Class I, Division 1 (Zone 0), Intrinsically Safe
- RS485 Modbus version available
Integrated H2S Detection Solution
The OleumTech® OTC Wireless Hydrogen Sulfide (H2S) Gas Detection Transmitters are self-contained, battery-powered solutions for continuously monitoring air quality and generating alarms when H2S concentration levels exceed user-configured setpoints. The transmitters are equipped with a replaceable H2S sensor module enclosed in a robust 316 stainless steel housing with a steel mesh filter. A dust/splash guard is also included for added layer of protection. The H2S Transmitters provide helpful sensor maintenance tags like bump test count, total days since last successful bump test, and calibration. The H2S-A option provides two solid state relay outputs for third-party device alarm annunciation. Bump tests and alarm acknowledgments can be performed using a single external button.
Reliable, Scalable and Safe
The H2S Transmitters provide separate controllable transmit intervals for both normal and alarm states. For exception reporting purposes,
event-triggered transmissions will be reported when going into or falling out of alarm states. The alarm states are latchable. The local user interface allows for device configuration and instant data access.
The field-proven wireless transmitters communicate with an assigned wireless gateway within the OTC Wireless Sensor and I/O Network creating a highly scalable network, accommodatong virtually any I/O requirement. The OleumTech wireless transmitters are Intrinsically Safe and certified for use in Class I, Division 1 (Zone 0) hazardous locations.
| WIRELESS COMMUNICATIONS | |
|---|---|
| Radio Band | ∙ ISM Band (License-Free) |
| 900 MHz / 915 MHz | ∙ FHSS, FSK, AES Encryption 256-bit (900 MHz), 128-bit (915 MHz) |
| 2.4 GHz | ∙ DSSS, AES Encryption 128-bit |
| 868 MHz | ∙ LBT-AFA, AES Encryption 128-bit |
| Bit Rate | ∙ 900/915 MHz: 9600 bps / 115.2 kbps; 2.4 GHz: 250 kbps; 868 MHz: 80 kpbs |
| Output Power (Max) | ∙ 900/915 MHz: 10 mW; 2.4 GHz: 63 mW; 868 MHz: 25mW |
| Receiving Sensitivity | ∙ 900/915 MHz: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps |
| ∙ 2.4 GHz: -101 dBm @ 250 kbps; 868 MHz: -106 dBm @ 80 kbps | |
| RF Range | ∙ 900/915 MHz: Up to 7500 Feet / 1.4 Miles / 2.3 km with Clear Line of Sight |
| ∙ 2.4 GHz: Up to 1.9 Miles / 3.1 km with Clear Line of Sight | |
| ∙ 868 MHz: Up to 1.5 Miles / 2.4 km with Clear Line of Sight |
| HARDWARE FEATURES | |
|---|---|
| Device Functionality | ∙ Wireless Transmitter with Hydrogen Sulfide Gas Detection Capabilities |
| Embedded Controller | ∙ Ultra-Low Power RISC Microcontroller with Internal FLASH (Field Upgradeable) |
| Configuration | ∙ Standard RS232 Serial / BreeZ® Software for PC or LCD Interface |
| Power Source | ∙ Self-Contained, Internal 3.6 Vdc Lithium Battery |
| Internal Battery Life | ∙ Up to 5.11 Years @ 60 Min Interval, Up to 2.35 Years @ 1 Min Interval - Life Based on User Defined Reporting Intervals |
| Local LCD Display | ∙ 32-Character Display (16x2 Lines) with 4 Function Keys + External Scroll Button |
| Instant Displayable Read | ∙ PPM Level / Alarm 1 and 2 Status / Battery Voltage / RF Status |
| Alarm Status DOs | ∙ 2 Solid State Relays (High and High-High), WT-H2S-A Only |
| Local Configuration/Cal | ∙ Integral LCD with Four Function Key Interface |
| Bump Test | ∙ Bump Test / Alarm Acknowledgment Performed Using the External Scroll Button |
| Device Diagnostics | ∙ Health Tags: Battery Voltage, Received Signal Strength Indication (RSSI), RF Refresh, RF Timeout |
| MECHANICAL SPECIFICATIONS | |
| Dimensions | ∙ 5.5" (W) x 10.5" (H) x 4.5" (D) / 140 mm (W) x 267 mm (H) x 114 mm (D) |
| Package Dimensions | ∙ 10.5" (W) x 14.5" (H) x 6.5" (D) / 267 mm (W) x 368 mm (H) x 165 mm (D) |
| Packaging Weight | ∙ WT-H2S: 6 lbs / 2.7 kg | WT-H2S-A: 7.5 lbs / 3.4 kg |
| Enclosure Casing Material | ∙ Type 4X Aluminum; IP66 |
| CERTIFICATIONS & COMPLIANCE | |
|---|---|
| EMC/EMI | ∙ FCC Part 15 (USA), IC ICES-003 (Canada) |
| ∙ EN55032 & EN55024 (EU) | |
| Safety | ∙ Class I, Division 1, Groups A, B, C, D T3C; Ex ia IIC T3 |
| ∙ Class I, Zone 0; AEx ia IIC T3 | |
| ∙ ATEX: Sira 13ATEX2142X; Ex ia IIC T3 Ga; II 1 G | |
| ∙ IECEx: SIR 13.0054X; Ex ia IIC T3 Ga |
| GENERAL SPECIFICATIONS | |
|---|---|
| Operating Conditions | ∙ Ambient Temperature (Class I, Division 1 / Zone 0): -40 to 50 °C (-40 to 122 °F) |
| ∙ Ambient Temperature (ATEX/IECEx): -40 to 50 °C (-40 to 122 °F) | |
| ∙ LCD Screen -20 °C to 70 °C (-4 °F to 158 °F) | |
| ∙ Humidity: 0 to 99 %, Non-Condensing | |
| Warranty | ∙ 2-Year Parts and Labor |
| Country of Origin | ∙ USA |
| HYDROGEN SULFIDE (H2S) DETECTION SENSOR | |
|---|---|
| H2S Measurement Range | ∙ 0.0 to 100 ppm (Maximum Overload: 200 ppm) |
| Resolution | ∙ 0.1 ppm |
| Sensitivity (20 °C) | ∙ 0.45 ± 0.10 µA/ppm |
| Response Time (T90) | ∙ ≤ 30 s |
| Zero Signal (20 °C) | ∙ < ± 0.4 µA |
| Baseline Shift (-40 to 50 °C) | ∙ < 0.5 ppm |
| Linearity | ∙ Linear Up to 100 ppm |
| Bias Voltage | ∙ 0 mV |
| Temperature Range | ∙ -40 to 50 °C (Recommended Storage Temp: 10 to 30 °C) |
| Pressure Range | ∙ 1 ± 0.1 atm |
| Humidity | ∙ 15 to 90 % RH Non-Condensing |
| Life Time Output Drift | ∙ < 2 % Signal/Month |
| Expected Operating Life | ∙ 2 Years in Clean Air |
| Storage Life | ∙ 6 Months in Original Packaging |
| Accuracy | ∙ -20 to 50 °C: +/- 5 % of Reading or +/- 2 ppm (Whichever is Greater) |
| ∙ -40 to 50 °C: +/- 10 % of Reading or +/- 3 ppm (Whichever is Greater) | |
| Calibration | ∙ Individually Calibrated (NIST Traceable) |
| Field Calibration | ∙ Set Calibration Level Between 10-50 ppm in 5 ppm Increments (Within +/- 3 ppm of Reading) |
| Sensor Module | ∙ Replaceable Cartridge Type |
| Maintenance | ∙ Use Only Non-Pressurized Water to Clean the Outer Dust Filter Element |
| ORDERING INFORMATION | |
|---|---|
| Model Numbers | ∙ Standard: WT-0900-H2S, WT-0915-H2S, WT-2400-H2S, WT-0868-H2S |
| ∙ 2 Alarm Output Option: WT-0900-H2S-A, WT-0915-H2S-A, WT-2400-H2S-A, WT-0868-H2S-A | |
| Wirelessly Connects To | ∙ OTC Wireless Gateway |
| Configuration Cable | ∙ SX1000-CC2, 20-ft All-in-One Configuration Cable |
| Replacement Battery | ∙ Use OleumTech SX1000-BP3 Only |
Follow Us