WIRELESS ANALOG (PRESSURE)/DISCRETE TRANSMITTER
0-5 V Pressure Monitoring Solution, Battery-Powered, Self-Contained

WT-AD1
HIGHLIGHTS
- 3 analog inputs (0-5 Vdc, 24-bit ADC)
- 1 discrete input (dry contact / NPN)
- Up to a 10-year battery life
- Battery powers transmitter and sensor for complete standalone operation
- Supports Over-the-Air (OTA) functionality for updating the device configuration/calibration (900 MHz only)
- Advanced local LCD display interface
- Self-contained, rugged design
- Installs in minutes
- IP66, -40 ˚C to 70 ˚C (-40 ˚F to 158 ˚F)
- 900/915 MHz range: Up to 1.4 Miles / 2.3 km with Clear Line of Sight
- 2.4 GHz range: Up to 1.9 Miles / 3.1 km with Clear Line of Sight
- 868 MHz range: Up to 1.5 Miles / 2.4 km with Clear Line of Sight
- Secure AES encryption
- Class I, Division 1 (Zone 0)
- Intrinsically Safe

3 Analog Inputs + 1 Discrete Input
The OleumTech® OTC Wireless Analog/Discrete Transmitter is a self-contained, battery-powered solution for remotely monitoring up to three 0-5 Vdc analog and one discrete input signals. The WT-AD1 delivers up to 9.5 Vdc of power to connected analog sensors. You can calibrate both the zero and max analog point values.
The discrete input is ideal for connecting to a dry contact or open-drain output/NPN source for monitoring state changes. It can be set to normally open or normally closed mode. This ultra-low-power transmitter is powered by a replaceable battery pack that provides up to a 10-year life. The push button LCD interface allows for device configuration and instant local data access.
Reliable, Scalable, and Safe
The field-proven wireless sensor node communicates with an assigned wireless gateway within the OTC Wireless Sensor and I/O Network creating a highly scalable network, accommodating virtually any I/O requirement.
The OleumTech wireless transmitter is certified for use in Class I, Division 1 (Zone 0) hazardous locations. It is intrinsically safe, designed not to cause a spark, and can be serviced without being removed from a process.
TECHNICAL SPECIFICATIONS
WIRELESS COMMUNICATIONS | |
---|---|
Radio Band | ∙ ISM Band (License-Free) |
900 MHz / 915 MHz | ∙ FHSS, FSK, AES Encryption 256-bit (900 MHz), 128-bit (915 MHz) |
2.4 GHz | ∙ DSSS, AES Encryption 128-bit |
868 MHz | ∙ LBT-AFA, AES Encryption 128-bit |
Bit Rate | ∙ 900/915 MHz: 9600 bps / 115.2 kbps; 2.4 GHz: 250 kbps; 868 MHz: 80 kpbs |
Output Power (Max) | ∙ 900/915 MHz: 10 mW; 2.4 GHz: 63 mW; 868 MHz: 25mW |
Receiving Sensitivity | ∙ 900/915 MHz: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps |
∙ 2.4 GHz: -101 dBm @ 250 kbps; 868 MHz: -106 dBm @ 80 kbps | |
RF Range | ∙ 900/915 MHz: Up to 7500 Feet / 1.4 Miles / 2.3 km with Clear Line of Sight |
∙ 2.4 GHz: Up to 1.9 Miles / 3.1 km with Clear Line of Sight | |
∙ 868 MHz: Up to 1.5 Miles / 2.4 km with Clear Line of Sight |
HARDWARE FEATURES | |
---|---|
Device Functionality | ∙ Wireless Transmitter with Analog and Discrete Inputs |
Embedded Controller | ∙ Ultra-Low Power RISC Microcontroller with Internal FLASH (Field Upgradeable) |
Configuration | ∙ Standard RS232 Serial / BreeZ® Software for PC |
Inputs | ∙ 3 Analog Inputs (0-5 Volt), 24-bit ADC |
∙ 1 Discrete Input (For Dry Contact or Open-Drain Output/NPN Device) | |
Power Source | ∙ Self-Contained, Internal 3.6 Vdc Lithium Battery |
Available Power | ∙ Supplies Sensor Power Up to 9.5 Vdc |
Sensor Power Up Delay | ∙ Approximately 500 ms |
Internal Battery Life | ∙ Up to 10 Years, Based on User Defined Reporting Intervals |
Local LCD Display | ∙ 32-Character Display (16x2 Lines) with 4 Function Keys + Read Button |
Instant Displayable Read | ∙ Analog Input 1, 2, 3 / Discrete Input / Battery Voltage / RF Status |
Local Configuration | ∙ Integral LCD with Four Push Button Interface |
Device Diagnostics | ∙ Health Tags: Battery Voltage, Received Signal Strength Indication (RSSI), RF Refresh, RF Timeout |
MECHANICAL SPECIFICATIONS | |
Dimensions | ∙ 5.5" (W) x 12.6" (H) x 4.4" (D) / 140 mm (W) x 320 mm (H) x 112 mm (D) |
Package Dimensions | ∙ 10.25" (W) x 14" (H) x 6.5" (D) / 260mm (W) x 356mm (H) x 165mm (D) |
Package Weight | ∙ ~7 lbs / 3.2 kg |
Connection Fitting | ∙ (3) 3/4" NPT Female Ports (2x Plugged and Includes 1x 3/4" to 1/2" Reducer Bushing) |
Enclosure Casing Material | ∙ Type 4X Aluminum; IP66 |
CERTIFICATIONS & COMPLIANCE | |
---|---|
EMC/EMI | ∙ FCC Part 15 (USA), IC ICES-003 (Canada), ACMA (Australia) |
Safety | ∙ Class I, Division 1, Groups A, B, C, D T3C; Ex ia IIC T3 |
∙ Class I, Zone 0; AEx ia IIC T3 | |
∙ ATEX: Sira 13ATEX2142X; Ex ia IIC T3 Ga; II 1 G | |
∙ IECEx: SIR 13.0054X; Ex ia IIC T3 Ga |
GENERAL SPECIFICATIONS | |
---|---|
Operating Conditions | ∙ Ambient Temperature (Class I, Division 1 / Zone 0): -40 °C to 70 °C (-40 °F to 158 °F) |
∙ LCD Screen -20 °C to 70 °C (-4 °F to 158 °F) | |
∙ Ambient Temperature (Non-Hazardous Applications): -40 °C to 80 °C (-40 °F to 176 °F) | |
∙ LCD Screen -20 °C to 70 °C (-4 °F to 158 °F) | |
∙ Humidity: 0 to 99 %, Non-Condensing | |
Warranty | ∙ 2-Year Parts and Labor |
Country of Origin | ∙ USA |
ORDERING INFORMATION | |
---|---|
Model Numbers | ∙ WT-0900-AD1, WT-0915-AD1, WT-2400-AD1, WT-0868-AD1 |
Wirelessly Connects To | ∙ OTC Wireless Gateway |
Configuration Cable | ∙ SX1000-CC2, 20-ft All-in-One Configuration Cable |
Replacement Battery | ∙ Use OleumTech SX1000-BP3 Only |
Follow Us