WIRELESS ANALOG PRESSURE TRANSMITTER

Battery-Powered Self-Contained Pressure Monitoring Solution

JP4

HIGHLIGHTS

  • 4x analog inputs (0-5 Vdc, 24-bit ADC)
  • Up to a 10-year battery life
  • Self-contained, rugged design
  • Installs in minutes
  • Class I, Division 1 (Zone 0)
  • Intrinsically Safe
  • IP66, -40 °C to 70 °C
  • 900 MHz or 2.4 GHz radio option
  • Secure AES encryption

4x 24-bit Analog Inputs

The OleumTech® “JP4” Analog Transmitter is designed for connecting up to four analog 1-5 Vdc pressure sensors or analog devices. Each input provides high 24-bit analog to digital conversion (ADC). The wireless transmitter provides up to 9.5 Vdc to each analog output source. This ultra-low-power transmitter is powered by a replaceable battery pack that provides up to a 10-year life.

Reliable, Scalable and Safe

The field-proven wireless sensor node communicates with an assigned wireless gateway within the OTC Wireless Sensor and I/O Network creating a highly scalable network, accommodating virtually any I/O requirement. The OleumTech Wireless Transmitter is certified for use in Class I, Division 1 (Zone 0) hazardous locations. It is intrinsically safe, designed not to cause a spark, and can be serviced without being removed from a process.

This product is also available with a local display.

TECHNICAL SPECIFICATIONS

WIRELESS COMMUNICATIONS 
Type: 900 MHz / 2.4 GHz∙ ISM Band, Spread Spectrum
∙ 900 MHz: FHSS (Frequency Hopping), FSK, AES Encryption 256-bit (900 MHz), 128-bit (915 MHz)
∙ 2.4 GHz: DSSS (Direct-Sequence), AES Encryption 128-bit
Bit Rate∙ 900 MHz: 9600 bps / 115.2 kbps ; 2.4 GHz: 250 kbps
Output Power∙ 900 MHz: 10 mW; 2.4 GHz: 63 mW
Receiving Sensitivity∙ 900 MHz: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps / 2.4 GHz: -100 dBm @ 250 kbps
RF Range∙ 900 MHz: Up to 7500 Feet (2.3 km) with Clear Line of Sight
∙ 2.4 GHz: Up to 7 km / 4.3 miles with Clear Line of Sight
HARDWARE FEATURES 
Device Functionality∙ Wireless Transmitter with Analog Inputs
Embedded Controller∙ Ultra-Low Power RISC Microcontroller with Internal FLASH (Field Upgradeable)
Configuration∙ Standard RS232 Serial / BreeZ® Software for PC
Inputs∙ 4x Analog Inputs (0-5 Volt), 24-bit ADC
Power Source∙ Self-Contained, Internal 3.6 Vdc Lithium Battery
Available Power∙ Supplies Sensor Power Up to 9.5 Vdc
Sensor Power Up Delay∙ Approximately 500 ms
Internal Battery Life∙ Over 10 Years, Based on User Defined Reporting Intervals
Device Diagnostics∙ Health Tags: Battery Voltage, Received Signal Strength Indication (RSSI), RF Refresh, RF Timeout
MECHANICAL SPECIFICATIONS
Dimensions∙ 5" (W) x 12.6" (H) x 4.4" (D) / 127 mm (W) x 320 mm (H) x 112 mm (D)
Package Dimensions ∙ 10.25" (W) x 14" (H) x 6.5" (D) / 260 mm (W) x 356 mm (H) x 165 mm (D)
Package Weight∙ ~7 lbs / 3.2 kg
Connection Fitting∙ 3x 3/4" NPT Female Ports (2x Plugged and Includes 1x 3/4" to 1/2" Reducer Bushing)
Enclosure Casing Material∙ Type 4X Aluminum; IP66
CERTIFICATIONS & COMPLIANCE 
EMC/EMI∙ FCC Part 15 (USA)
∙ IC ICES-003 (Canada)
Safety∙ Class I, Division 1, Groups A, B, C, D T3C; Ex ia IIC T3
∙ Class I, Zone 0; AEx ia IIC T3 / Ta = -40 to 158 °F (-40 °C to 70 °C)
∙ ATEX: Sira 13ATEX2142X; Ex ia IIC T3 Ga; II 1 G
∙ IECEx: SIR 13.0054X; Ex ia IIC T3 Ga / Ta = -4 to 158 °F (-20 °C to 70 °C)
GENERAL SPECIFICATIONS 
Operating Conditions∙ Ambient Temperature (Class I, Division 1): -40 °F to 158 °F (-40 °C to 70 °C)
∙ Ambient Temperature (Non-Hazardous Applications): -40 °F to 176 °F (-40 °C to 80 °C)
∙ Humidity: 0 to 99 %, Non-Condensing
Warranty∙ 2-Year Parts and Labor
Country of Origin∙ USA
ORDERING INFORMATION 
Model Numbers∙ 900 MHz: SM5000-JP4; 2.4 GHz: SM5400-JP4
Wirelessly Connects To∙ OTC Wireless Gateway
Configuration Cable∙ SX1000-CC2, 20-ft All-in-One Configuration Cable
Replacement Battery∙ Use OleumTech SX1000-BP3 Only