Product Accessories
SX1000-BP3
REPLACEMENT BATTERY FOR C1D1 OLEUMTECH TRANSMITTERS
3.6 Vdc Primary Lithium Thionyl Chloride (Li-SOCI2)
Use with Intrinsically Safe (CID1/Zone 0) Transmitters
SX1000-BP2
REPLACEMENT BATTERY FOR OLEUMTECH GENERAL PURPOSE OLEUMTECH TRANSMITTERS
NOT FOR USE IN HAZARDOUS LOCATIONS
3.6 Vdc Primary Lithium Thionyl Chloride (Li-SOCI2)
Use only with General Purpose Transmitters and Cathodic Protection Transmitter
Non-Hazardous Location Use Only
SX0900-OTA
OTA LINK ADAPTER
For Use with a Wireless Gateway
900 MHz ONLY, 20 mW
USB (to PC)
SMA (to Antenna)
Antenna and Cable Sold Separately
SX1000-BTK
BUMP TEST KIT FOR H2S TRANSMITTER
Includes Housing Adapter, 3/16” (ID) Barb, Removable Plug, and 18” Tubing
Gas canister not included
The kit is used for performing bump tests and H2S sensor calibration
WX-1001-CA2
15FT USB TO MINI-USB CABLE
Works with DH3, DH2-W, GP Wireless Nodes, Sigfox GP Nodes, WIO System
SX1000-MS1
MAGNETIC SWITCH KIT
1/2″ NPT Direct-Mount Switch Kit for OleumTech HTF1740 and HTF1741
Tuning Forks to verify operation
WIKA Pressure Sensors
OleumTech proudly offers WIKA pressure transducers for their high quality, reliability, and rugged performance.
Listed pressure sensors with 1-5 V output and 1/2-inch NPT fitting are designed for use with any OleumTech product with an analog input.
15 PSI – Part# E10-00015
60 PSI – Part# E10-00060
100 PSI – Part# E10-00100
200 PSI – Part# E10-00200
300 PSI – Part# E10-00300
500 PSI – Part# E10-00500
1,000 PSI – Part# E10-01000
1,500 PSI – Part# E10-01500
2,000 PSI – Part# E10-02000
3,000 PSI – Part# E10-03000
5,000 PSI – Part# E10-05000
10,000 PSI – Part# E10-10000
15,000 PSI – Part# E10-15000
SP2-10E and SP2-10S
SOLAR POWER PACK
▪ External power solution for the IO MAX®
▪ Integrated solar panel and battery design
▪ Rechargeable Sealed Lead Acid batteries
▪ 10 Watt Solar Panel
▪ SP2-10E: 5 AH SLA, -40 ˚C to 80 ˚C charging
▪ SP2-10S: 9 AH SLA, -20 ˚C to 50 ˚C charging
▪ IP66 protection
▪ Class I; Division 2 Solar Panel
▪ Includes 3-stage charging controller with temperature compensation
▪ Includes mounting kit
SX1000-SPC
EXTENSION CABLE WITH FLYING LEADS
For use with Solar Power Pack: SP2-10E and SP2-10S
Cable length: 6.5 ft (2 m)
SX1000-XCT
DC CHARGER CABLE
For use with Solar Power Pack; SP2-10E and SP2-10S
SX1000-CON | SX1000-RND
VOLTAGE/CURRENT CONVERTER KIT
SX1000-CON: 4-20 mA to 1-5 V Converter
SX1000-RND: Resistor Network Divider
Length: 1.625″ (4.1 cm)
Height: 1.25″ (1.5 cm)
Width: 0.625″ (3 cm)
SX1000-MK9
MOUNTING KIT FOR SMART PRESSURE TRANSMITTER
L-Bracket: 6.9″ x 6.3″ (176 mm x 160 mm)
U-Bolt 1: Diameter: 2″ (50.8 mm), Radius: 0.83″ (21 mm)
U-Bolt 2: Diameter: 3″ (76.2 mm), Radius: 1.28″ (32.5 mm)
SX1000-MK10
MOUNTING KIT FOR SMART DIFFERENTIAL PRESSURE TRANSMITTER
Wall or 2″ Pipe Mounting Kit, Includes Bracket and Hardware
Follow Us